Tools - Specialty Tools |
|
|
|
 |
BOGERT COMANCHE BUNGEE TOOLLower damage risk with the right tool. Complete control of bungee shock cords coming off. Complete control of bungee shock cords going on. E-Z instructions with detailed drawings. Safe landings depend on new cords every few years. View more details |
| 06-00419 | BOGERT STRETCHING TOOL | $78.00 | 
| |
|
 |
NON-CONTAMINATING SCRAPEROur Non-Contamination Scraper is suitable for all airframe scraping operations. It will not contaminate delicate aluminum parts with steel particles which can induce corrosion. View more details |
| 12-30205 | NON-CONTAMINATING SCRAPER | $21.60 |
| |
|
 |
ARC360 HOLE CUTTERThe tools on the market for cutting lightning holes in your airframe parts have never impressed me much especially if the holes are larger than a couple of inches in diameter. Panel knock put punches and hole saws work well for holes that are aren’t too big but it gets harder and more expensive as the size of the hole increases. View more details |
| 12-01977 | NOAH ARC-360 HOLE CUTTER | $98.95 |
| |
|
 |
SWIVEL HEAD PIN VISEHas two double-end collets with a capacity of .0 to .187 in. or .0 to 3.2mm. Screw chuck tightly holds small drills, burrs, wire and miniature tools. View more details |
| 92 | SWIVEL HEAD PIN VISE #92 | $9.75 |
| |
|
 |
MICRO STOPThis tool permits you to set the desired cut depth to help eliminate mistakes and skin damage. View more details |
| 12-01470 | ECON MICRO STOP | $19.60 |
| |
|
 |
CESSNA COWLING FASTENER DRIVERSlotted type cowling fasteners are not easy to fit with generic common screwdrivers. To overcome this, this driver has a broad hollow cut tip that accurately engages the drive slot. Additionally, a no mar, spring loaded, plastic sleeve simultaneously guides the tip by fitting around the outside diameter of the fastener head. View more details |
| 12-17615 | CESSNA COWLING FASTENER DRIVER | $22.25 |
| |
|
 |
S4-3 RACE REMOVAL TOOLThe S4 magneto seal installation, inner and outer race installation tool is three tools in one and is proportioned in such a way that it is easily accommodated by most small bench arbor presses. View more details |
| 12-17603 | S4-3 RACE REMOVAL TOOL | $89.75 |
| |
|
 |
BLIND SKIN SCRIBEFor use on flush skin butt joints. This tool quickly and easily finds the cut line on the overlap of new metal. The lower leg slides under the new metal and hooks on the adjacent skin and the upper leg scribes the new skin as it pulled along. View more details |
| 12-00746 | BLIND SKIN SCRIBE | $33.75 |
| |
|
 |
S4-2 RACE REMOVAL TOOLThe S4 magneto drive end inner race removal tool works in conjunction with a standard bearing puller. The split gripper ring fits behind and around the race and is captured in the puller ring by two opposing set screws. A groove on the puller ring provides the point of attachment for the puller arms. View more details |
| 12-17602 | S4-2 RACE REMOVAL TOOL | $127.95 |
| |
|
 |
SWIVEL HEAD PIN VISEHas 2 double-end collets with a capacity of 0 to .187 in. or 0 to 3.2mm. Screw chuck tightly holds small drills, burrs, wire & miniature tools. View more details |
| 92 | SWIVEL HEAD PIN VISE #92 | $9.75 |
| |
|
 |
CUSHIONED CABLE CLAMP
(ADEL CLAMP) INSTALLATION PLIERSThese special pliers allow for greatly simplified installation of single or multiple Adel type cushioned clamps. The pliers securely hold the aligned clamps in position, allowing for easy installation of securing hardware. Each kit includes special plier, alignment awl, and simple instructions. View more details |
| 12-02017 | CUSH CABLE CLAMP INSTL PLIERS | $38.50 |
| |
|
