Tools - Clamping Tools |
|
|
|
 |
3RD HAND WELDING CLAMPA simple yet rugged tool, the 3rd Hand was designed to hold round or square tubing in place during the welding process. Originally used for aircraft engine mount View more details |
| |
|
 |
SIDE GRIP CLAMPSDesigned to hold two or more work pieces together where no holes exist. Clamping force is applied at edge of work. Spring loaded, plier actuated. The lack of a takeup screw makes it impossible to over-tighten and damage the work surfaces or the clamp. View more details |
| 12-01143 | SIDE GRIP CLAMPS P/N SC-1/2-1 | $2.25 | 
| |
|
 |
SPRING TENSION CLAMPSSpring tension clamps can be applied in a fraction of the time required for ordinary screw clamps. The AT542 clamp, with 2" throat depth, has a Zamak alloy yoke and a steel spring which provides a 70 lb. clamping pressure. Designed for use with sheet holder pliers. View more details |
| AT542 | SPRING TENSION CLAMP AT542 | $6.40 |
| |
|
|
 |
FUSELAGE ROTATORNow you dont have to defy the law of gravity when your repairing, restoring, recovering or building a fuselage. Just roll fuselage to the position you want & lock it in place.You dont have to work with dirt, welding spatters, metal shavings, paint and dopes falling in your face or running down your sleeves! View more details |
| 12-16784 | BOGERT FUSELAGE ROTATR COMPLET | $878.00 |
| |
|
|
|
 |
SCROOGE CLAMPBy attaching this mechanism to any brace, piece of wood or steel, it can be made adjustable simply by turning the handle. It works like a C-Clamp that will push or pull. It can be used in place of a bar or pipe clamp, and can be made any length by using a 2x2 or 2x4 piece of lumber. View more details |
| 12-00636 | SCROOGECLAMP | $27.50 |
| |
|
|
