STICK IT TEMPORARY ADHESIVE

Have you ever been working behind an instrument panel and needed a way to position a nut on the back of a gauge way up out of reach by ordinary tools? One finger might get in there but nothing else... Well, here's your solution - STICK ITŪ temporary adhesive... Open the handy gluestick container and dab a very small amount of STICK ITŪ on the end of your finger, touch it to the nut and presto you are in business! Reach up into that impossible cranny, position the nut and turn the screw until it catches. - Simple when you have the right stuff. Or hold the nut in your socket with a little STICK ITŪ, keeping the nut in the wrench while positioning it from overhead, assembling hard to reach transmission bolts or almost any small position or hold problem. STICK ITŪ was developed using a sophisticated laboratory force measurement instrument to have precisely the "stickiness" and ease of removal you need to hold light assemblies and parts together and STICK ITŪ clean up easily when you are finished. STICK ITŪ is a formula of proprietary waxes and surfactants that will not corrode, delaminate or irritate - it is designed to be benign yet hold tenaciously when you need it. It should not affect cured paint or epoxy, but test it first if you are not sure or if appearance is critical.

Benefits

Holds Tight Temporary Non-Corrosive Non-Conductive Wipes Off Clean Biodegradable Will not Delaminate Easy to Carry Easy to Use

Description Part No. Price Buy STICK IT TEMPORARY ADHESIVE 02-00118 $10.75