Thousands
of feet of S2S aircraft quality spruce are
stocked in our Corona, CA. warehouse. Orders for spars, spruce kits
and capstrip can usually be shipped within three weeks after receipt
of order. Spars wider than 6" must be milled from 8" specially selected
stock which requires a long and indefinite lead time. Prices on request.
Spruce and tubing kits may be combined with plywood
and other building supplies for a single truck delivery charge.
NOTICE
We supply
only certified aircraft grade spruce. Do not accept lower grades
of spruce for lower prices in your project. It is no bargain.
Demand top quality. Capstrip may be cut from "C and better" graded
spruce as it is a nonstructural. No Packaging Charges on Spruce
General
Ordering Information Aircraft spruce spars are
available either S2S (surfaced 2 sides, top & bottom, with rough edges in
4" & 6" nominal width) or S4S (surfaced all 4 sides to thickness & width).
Prices in table below are for S4S spars. If S2S is desired so builder can
trim to exact width, specify S2S and use 4" or 6" width prices from table.
Request quote on spar widths wider than 6". Spars for certificated aircraft
such as Aeronca, Stearman, Taylorcraft and Piper are available and may be
priced from the table. Since many of these early aircraft were “handmade”,
the spars are often not uniform in size for a particular model. Therefore,
the finished net dimensions should be specified when ordering replacement
spars. Please price to nearest fraction.
When ordering either spars or capstrip, designate the thickness
first, then the width and length. Examples: 3/4"T x 4 1/4"W x 14’L
spar; 1/4"T x 1/2"W x 5’L capstrip
For additional technical information refer
to a complete reprint of spruce specification MIL-S 6073 and plywood specification MIL-P-6070. P/N 13-14900 $3.50 or click here to download a PDF of
Aircraft Spruce MIL-S-6073 & Plywood MIL-P-6070
Faster delivery can
be assured if guidelines regarding minimum acceptable lengths are provided.
Orders are often delayed awaiting delivery of lumber to the even footage
specified whereas shipment could be made if the minimum usable lengths were
indicated. Example: 3/4" nominal 6" x 12' (131-1/2" min.)
FINISHED CAPSTRIP, LONGERONS, STRINGERS
Price per Lineal Foot*
Thick (Inches)
WIDTH
(Inches)
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1/8
$0.21
$0.21
$0.23
$0.25
$0.30
$0.32
$0.35
$0.43
3/16
$0.21
$0.21
$0.23
$0.25
$0.30
$0.32
$0.35
$0.43
1/4
- --
$0.21
$0.23
$0.25
$0.30
$0.32
$0.35
$0.43
5/16
-
--
$0.26
$0.30
$0.43
$0.49
$0.52
$0.55
3/8
--
$0.44
$0.51
$0.60
$0.75
$0.90
1/2
--
$0.68
$0.81
$0.98
5/8
--
$0.98
$1.14
3/4
--
$1.20
Thick (Inches)
WIDTH
(Inches)
7/8
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
1/8
$0.49
$0.55
$0.71
$0.84
$0.99
$1.13
$1.28
$1.40
3/16
$0.49
$0.55
$0.71
$0.84
$0.99
$1.13
$1.28
$1.40
1/4
$0.49
$0.55
$0.71
$0.84
$0.99
$1.13
$1.28
$1.40
5/16
$0.58
$0.64
$0.84
$1.04
$1.13
$1.31
$1.50
$1.70
3/8
$1.05
$1.21
$1.50
$1.81
$2.11
$2.18
$2.74
$2.98
1/2
$1.13
$1.28
$1.66
$1.99
$2.28
$2.67
$3.14
$3.33
5/8
$1.33
$1.44
$1.71
$2.18
$2.37
$2.86
$3.24
$3.43
3/4
$1.36
$1.53
$1.88
$2.28
$2.46
$2.95
$3.33
$3.63
7/8
$1.55
$1.71
$2.08
$2.46
$2.84
$3.24
$3.61
$3.93
1
$1.98
$2.43
$2.90
$3.23
$3.58
$3.95
$4.23
*Prices shown are for lengths under 7 feet. Add 20% for lengths 7-10 feet and 35% for lengths over 10 feet. Please order by part number and also state exact thickness and width. Begin part number with “02”, then thickness & width. Example: 1/4"T x 3/8"W is P/N 02-1438.
Wood Products - Spruce
