This
is the machine you don't have to "baby". The Micro Lathe is a rugged, precision
instrument. Its machined, ground and stabilized steel bed has a lifetime
ball bearing spindle, coupled w/ a 6-speed positive v-belt drive. Spindle
speeds in geometric progression from 525-5200rpm pro- vide the power to
"HOG" 1/8" cuts in mild steel or the speedand
accuracy to dust a few tenths. Other big lathe features include large
.001 graduations on the cross slide dial, an all-angle tool post and a carriage
depth stop. Adjustable gibs provide full compensation
for carriage and cross slide wear. 2-yr. factory warranty. 15" bed. Comes
factory assembled.
Unit pictured is basic unit (P/N 12-00171) optional 3-Jaw Chuck, Boring
bar(1097E), Tailstock (1150), Drill Chuck (1091), 1/4 HP 1725 RPM Motor
(1021w), Motor Mount Bracket (1022), Mounting Board (1023), and Pulleys
(1162 with 3M 500 belt). All accessories are sold separately and
are not included in the base price.
General
Specifications:
• Overall working accuracy: 0.0005"
• Max. bearing run out: 0.0004"
• Headstock normality to bed: .0004 in max. error
• Max. taper bed dovetail over pins: 0.0001"
• All machine dovetails: 45°
• Bed width: 2-5/16 "
• Cross slide dial graduation: 0.001
• Cross slide screw: 1/4"-20 adjustment for back- lash take-up provided
(jam nut arrangement)
• Carriage travel: 0.600" 1 rev. of hand
wheel
• Max. spindle speed
recommended: 7000 rpm
• Motor requirement: 1/8 1/4 HP
• Pulley type: Std. 5/8" bore, multi-step
V-belt
• Length of headstock on ways: 2.875"
• Length of carriage on ways: 3.000"
• Width of cross slide on carriage: 2.0"
• Tool post: may be adjusted for angle cutting (chamfer, boring, etc.)
Capacity:
• Swing over bed: 4.5"
(max. turning dia.)
• Swing over cross slide: 2-3/8"
• Overall length of bed: 15.5"
• Tool bit size: 1/4"* Drill chuck capacity:
0 to 1/2"
• Overall length of
lathe: 15.5
• Distance between centers: 9.75"
• Carriage travel: 9"
• Cross slide travel: 1.75"
Tools - Power Tools
This
is the machine you don't have to "baby". The Micro Lathe is a rugged, precision
instrument. Its machined, ground and stabilized steel bed has a lifetime
ball bearing spindle, coupled w/ a 6-speed positive v-belt drive. Spindle
speeds in geometric progression from 525-5200rpm pro- vide the power to
"HOG" 1/8" cuts in mild steel or the speedand
accuracy to dust a few tenths. Other big lathe features include large
.001 graduations on the cross slide dial, an all-angle tool post and a carriage
depth stop. Adjustable gibs provide full compensation
for carriage and cross slide wear. 2-yr. factory warranty. 15" bed. Comes
factory assembled.