PLANE SIGHTS AIRCRAFT MARKERS

Each year, over 18 percent of small aircraft suffer ground damage to win-tips, static wicks, elevators, rudders, rotors, propeller blades and other parts while being moved in and out of crowded community hangars. • PLANE SIGHTS highly reflective markers make vulnerable areas clearly visible under all conditions, and their projecting "proximity fuses" warn that something is too close before damage occurs. • PLANE SIGHTS markers are easily custom-fitted to virtually any aircraft, take only minutes to attach and remove, and weigh only three pounds folded into their briefcase-size pouch. • PLANE SIGHTS markers are available in sets of two to five pieces, for fitting to win tips and propeller blades. A full set, including its carrying pouch, weighs only three pounds and stows under any aircraft seat. Once initial fitting is done, the markers can be installed and removed in minutes during routine pre- and post-flight walk-arounds. Click to Enlarge Universal Aircraft Marker Highly reflective markers make vulnerable wing and elevator tips clearly visible under all conditions, and their projecting “proximity fuses” warn that something is too close before damage occurs. Plane Sights universal wing and elevator markers fit all aircraft from Airliners to light sport aircraft, including models with static wicks and strobe lights. Weight: 0.08 kg Package Contents: Two (2) corner marker pieces, two (2) harness pieces, two (2) marker fuses, four (4) 54” lengths of shock cord with cord hook ends, and four shock cord hook ends for assembly. PN 13-05603 $165.00 Click to Enlarge 2 Prop Marker Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. Prop Markers are easily installed and removed in just seconds, adding virtually no additional time to your walk around. This prop marker fits aircraft such as a Cessna 150/152 or similar two blade aircraft with small nose cone. Weight: 0.08 kg 2 Bladed, comes in S, M nose cone SMALL PN 13-05605 $84.00 MEDIUM PN 13-05606 $83.75 Click to Enlarge 3 Prop Marker Spend less time worrying about jeopardizing the safety of you and your passengers. Featuring light reactive trims and tapes, these highly reflective Prop Markers are made to improve the visibility of your prop and aircraft day or night, helping you prevent the unexpected depreciation of your plane. This prop marker fits aircraft such as a Cirrus SR22, Cessna 206, Cessna 182, Piper Malibu, Beech Bonanza, Beech Barron or similar three blade aircraft with medium size nose cone. Weight: 2.60 kg 3 Bladed, comes in S, M nose cone MEDIUM PN 13-05607 $94.00 LARGE PN 13-05608 $94.00 Click to Enlarge Static Wick Markers Keep your plane safe from unnecessary ground damage.Each Static Marker also features an integrated Marker Fuse, warning you when your plane comes dangerously close to making contact with another object and preventing static wick breakage. Weight: 0.04 kg Package Contents: Three (3) Staic Wick Markers with 9.25” streamers. Six (6) marker fuses and instructions PN 13-05609 $173.00 Click to Enlarge Universal Pitot Tube Cover The bright orange and yellow universal pitot tube covers work on any length tube from ¼” up to 7/8” in diameter. The cleverly designed hook/loop Velcro strap with sewn in rubberized trim allows it to tightly, securely and quickly fasten to virtually any straight or angled pitot tube. Reflective length 7.25" Cover length 5.25" Strap length 10.25" PN 13-05610 $12.95 Click to Enlarge GA Pitot Tube Cover Our GA Pitot Tube cover works on most Cessna, Piper, Beechcraft and other angled pitot tubes. Unlike the standard angled pitot tube covers, we use nylon thread to sew on, not glue our large pieces of Velcro so that our hook/loop pieces never come off, as is so common with our competition. From tip to back the tube must not exceed 6.75”. If it does, our Universal Pitot tube cover would be a better choice. Reflective is 7.75” long. Inside diameter of the cover is 7/8’s of an inch. PN 13-05611 $11.95 Click to Enlarge Remove Before Flight Streamer For gear pins, plugs and covers, this retro reflective streamer stands out like a sore thumb in daylight, darkness, ambient light and incumbent weather. Measuring just over one foot long, each streamer comes complete with a sizeable shock cord and safety clips making it versatile enough for any REMOVE BEFORE FLIGHT application. Weight: 0.01 kg Package Contents: Streamer - 12.25" long x 2" wide, 8" long Shock Cord and shock cord clips PN 13-05612 $11.75 Click to Enlarge Light Sport Pilot Plug Kit Extremely obvious and very durable, our new Light Sport/Homebuilt Pitot Plug Kit is perfect for any smaller than 5/8”, non heated homebuilt, light sport pitot tube or fuel vent. The blazing yellow color of this foot-long, ANSI-compliant and weather-resistant reflective remove-before-flight streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The kit comes complete with three different sized pitot tube plugs, our unique streamer, and two rust resistant coated triangle rings. The kit can also be used to prevent bugs from plugging your fuel vent which can cause loss of power with Cessna, as well as other light sport and homebuilt aircraft. Weight: 0.14 kg Kit includes: Three (3) Plugs: 0.305”ID x7.0”L (7.747mm ID x 177.8mm L), 0.240”IDx 1.5”L (6.096mm ID x 38.10mm L), & 0.302”ID x 2”L (7.671mm ID x 50.80mm L) Two (2) triangle, zink coated rust resistant rings. One (1) very bright foot long remove-before-flight streamer. PN 13-06020 $12.95 Click to Enlarge Blade Pitot Cover For awhile now we’ve been hearing complaints about the bad design of other Blade Pitot Covers. They fall off, fade quickly in the sun, damage paint (when it’s being jammed on) and ware out, often within a year. Introducing the New Plane Sights ‘Blade Pitot Cover’ for your Piper/Diamond and many others. (As seen on the AOPA “Get Your Glass” sweepstakes aircraft) We solved the common problems associated with the urethane blade covers by adding rubberized trim and unique pull tab that allows the cover to firmly grip the tube, preventing it from being easily pulled off (yet alone blown off) while fastened. We like to say “if a tornado ripped through your hangar you might find your aircraft flipped over in a field, Blade Pitot Cover still attached!” Our new proprietary design combined with our standard durable contrasting orange, yellow, and reflective trim is sure to make the Plane Sights Blade Pitot Cover another best seller. Guaranteed for two years! Fits any blade pitot tube including (but not limited to) Piper Diamond and Lake amphibians PN 13-06016 $14.95 Click to Enlarge Pitot Tube Plug Our own durable molded poly plug and unmistakable Plane Sights Remove-before-Flight streamer are a perfect easy-on, easy-off pitot tube cover solution. The blazing yellow colour of this foot-long, ANSI-compliant and weather-resistant reflective streamer stands out equally well in daylight or darkness under all weather conditions, so it can’t be missed. The poly plug is attached to the streamers rugged black oxide coated zinc eyelet with a stainless steel ring. Weight: 0.04 kg Rust resistant, fade resistant, ware resistant and like every other Plane Sights product, guaranteed for two years, or your money back! PN 13-06018 (3/4") $12.95

Description Part Number Price Buy UNIVERSAL AIRCRAFT MARKER SET OF 2 13-05603 $165.00 2 PROP MARKER - SMALL 13-05605 $84.00 2 PROP MARKER - MEDIUM 13-05606 $83.75 3 PROP MARKER - MEDIUM 13-05607 $94.00 3 PROP MARKER - LARGE 13-05608 $94.00 STATIC WICK MARKERS 13-05609 $173.00 UNIVERSAL PITOT TUBE COVER 13-05610 $12.95 GA PITOT TUBE COVER 13-05611 $11.95 REMOVE BEFORE FLIGHT - STREAMER 13-05612 $11.75 LIGHT SPORT PILOT PLUG KIT 13-06020 $12.95 BLADE PITOT COVER 13-06016 $14.95 PITOT TUBE PLUG - 3/4" 13-06018 $12.95 PITOT TUBE PLUG - 5/8" 13-06019 $12.95