ANDAIR EXTENSION FUEL SELECTORS

For use with any Andair valve. The kit includes everything needed to operate the valve remotely by way of a specially extruded tube. There is no riveting involved, just cut the tube down to length and fit together. To maintain the firm detent at each tank selection, there is a detent cap on the top of the valve. The special tube then fits into this. Then, so as to maintain the safety feature, where the valve cannot be inadvertently switched off, the button has been moved to the upper section. Like the standard valves, the button must be raised to switch the fuel of. The tube is available 6” or 12” long and 4 extension options are available. The extension must be ordered with the valve. (i.e. an extension cannot be retro fitted to a previously purchased valve). Option Size(In.) Price Option Size(In.) Price ET 6 Call or Email for price and availability ET 12 Call or Email for price and availability 1JL 6 1JL 12 2JU 6 2JU 12 E Valve Part No. ET 6 Length of extension tube: 6 = 6" long. 12 = 12" long. 1JU 12 2UJ ET: with one universal joint on lower part of valve UJL: with one universal joint on the upper section of the valve UJU: with 2 universal joints. Example: E-FS25f5-M-ET-6 = (6”long, 1/2”Left, Main, Right, Off, Straight Ext. Valve) E-FS20-20-D2-6M-2UJ-12 = (12”long, 3/8”duplex fuel selector extension with 2 UJs and 12” tube). SPECIAL ENGRAVING - Andair can offer special engraving for all of the available valves. Please contact the Aircraft Spruce technical department for more information. Here are some examples: info@aircraftspruce.com Toll Free Order Line: 877-477-7823 Customer Service: 800-861-3192 Toll Free Fax Line: 800-329-3020 Outside USA: 951-372-9555 P.O. Box 4000 Corona, CA 92878-4000